Get the right tune: If you are thinking about buying a Factory-Series RP23 aftermarket, we would advise strongly that you buy it from a proper Fox supplier, as there are different tunes available for the boost valve, XV sleeve, compression and rebound damping, and ProPedal. The redesign gives the RP23 damper a wider range of tuning options without the complication and added weight of a piggyback-reservoir type damper. Adaptive Logic's low-speed compression adjustments control ride-height and mid-stroke suspension action. The compression adjustment controls the shock when the ProPedal lever is switched to 'open.' Turn the two-position lever to 'ProPedal and you get super firm pedaling that is preset internally. Here you can see how different the 2012 rebound adjust is (on the left)Īdaptive Logic: For 2012, fox has re-worked the adjustment on the ProPedal and re-named it 'Adaptive Logic.' You still get three options for the little dial on top of the lever, but now they are numbered '0', '1' and '2' and it sets the shock's low-speed compression damping. The XV air-volume boost sleeve is not coated because it has no moving parts Because the parts are immersed to receive the special coating, the outside of the air can gets coated too. A quick call to Fox Racing Shox, and they explained that both the shaft and the inside the air can have a Kashima coating as there are seals sliding on each surface. Kashima coated parts are sent to Japan where the patented (and expensive) process is applied, so we wondered why it looks like the coating was on the outside of the air cannister too. 'Gold' and 'Shiny.' Those words are music to the ears of bike tarts everywhere and for our money, this is the best-looking shock out there. Straight out of the box, you can’t help noticing the RP23's low-friction Kashima coating. Boost Valve position-sensitive compression damping Adaptive Logic three-position compression adjustment Kashima low-friction coating on shock body and internal shaft
0 kommentar(er)
